Akpaaka unscrewing injection ebu Elu okpomọkụ ebu |Oge anwụ

Akpaaka na-ewepụ ebu na-eme & Igwe ọkụ dị elu PPSU ihe atụpụtara onyonyo

Nkọwa dị mkpirikpi:

• oghere 4, ihe PPSU

• nnukwu okpomọkụ plastic injection ebu, akpaaka-unscrewing ebu.

• Anyị nwere afọ 'ahụmahụ nke ebu ime maka akpaaka-unscrewing ebu na elu okpomọkụ ebu

• N'ihi na PPSU ihe, na ebu okpomọkụ nwere ike iru 160 ~ 180 ogo

• Elu nkenke ebu na ndidi na-erughị +/- 0.02mm

Zitere anyị email

Nkọwa

Mkpado ngwaahịa

Okwu Mmalite ngwaahịa

• The elu okpomọkụ auto unscrewing oru ngo nwere ebu okpomọkụ nke 160 degrees na resin okpomọkụ nke 380 degrees.

• Nke a 4 oghere ebu nwere ngụkọta okirikiri oge nke 35 sekọnd na nnọọ ezigbo unscrewing ije.

• Akụkụ bụ nnukwu ndidi na ihe na-erughị+/- 0.02mm.

• A na-eji akụkụ na ngwaọrụ nke usoro mmiri mmiri miri emi.

Oke nke ikpe maka akpaaka na-ewepụ ihe ogbugba ogbugba?

Nchịkọta

Ngwa na Ụdị		Ngwaahịa usoro mmiri akpaaka unscrewing 4 oghere ebu, PPSU ihe, elu okpomọkụ ebu
Aha akụkụ		MINI PISTON
Resin		PPSU
Mba nke oghere		1*4
Isi Ebube		LKM S50C
Steel nke oghere & isi		H-13 HRC48-50 /H-13 HRC48-50
Ibu ngwaọrụ		430KG
Nha ngwá ọrụ		493X454X440
Pịa Tọn		120T
Ndụ ebu		800000
Usoro ịgba ọgwụ		Oyi na-agba ọsọ ebu
Usoro jụrụ oyi		160 ℃
Sistemụ mkpochapụ		na-ewepụ site na moto na wiil gia
Isi ihe pụrụ iche		ebu okpomọkụ 160 ℃, ihe okpomọkụ 380 ℃
Ihe isi ike		unscrewing nnọọ ezigbo, okirikiri oge 39'S, ndidi +/- 0.02mm.
Etiti oge		Izu ise
ngwugwu		Akwụkwọ mgbochi nchara na ihe nkiri, obere mmanụ mgbochi na igbe plywood
Nkwakọ ngwaahịa		Asambodo nchara, nke ikpeazụ 2D & 3D ngwá ọrụ imewe, ọkụ na-agba ọsọ akwụkwọ, akụkụ mapụtara na electrodes…
Mbelata		1.007
Ngwucha elu		B-2
Usoro ahia		FOB Shenzhen
Bupụ na		Ọstrelia

Na-ewepụ akpaaka PPSU Mold- Oge anwụ (1)

Nkọwa ndị ọzọ

• Ngwá ọrụ ịgba ntụtụ na-akpachapụ anya site na moto na wiil gia.

• Enwere ọtụtụ efere mkpuchi na ebu n'akụkụ anọ dịka ọnọdụ okpomọkụ dị elu nke ukwuu.

• Nke a 4 oghere ebu nwere ngụkọta ịkpụzi okirikiri oge 35 sekọnd na akụkụ ndidi bụ ihe na-erughị +/-0.02mm.

Rịọ maka nkwupụta ngwa ngwa

Ihe gbasara akpaaka ịgbapu ogbugba ogbugba

Gịnị bụ akpaaka unscrewing injection ịkpụzi?

Ịkpụzi ogbugba ogbugba na-akpaghị aka bụ usoro na-ejikọta injection ịkpụzi nke plastic ihe na akpaka unscrewing na mwepụ nke ịghasa eri (mpụta ma ọ bụ n'ime ma ọ bụ abụọ) si kpụrụ akụkụ.

A na-eji usoro a maka imepụta ihe dị ka brackets, knobs, fasteners, caps, valves na ndị ọzọ.

Igwe ntụtụ na-eme ka akpaaka na-eme ka efere sprue na isi efere tinyere eriri eriri nke na-enye ohere ịmegharị akpaka mgbe akụkụ ahụ kwụsịrị.

Usoro a na-ewepụ mkpa nke akwụkwọ ntuziaka na-ewepụ akụkụ nke threaded dị ka a na-eme ya na-akpaghị aka mgbe a chụpụrụ akụkụ ahụ site na oghere ebu.

Uru ndị dị n'ụdị injections na-eme ka akpaaka na-eme ka ọ bụrụ nke na-agụnye ichekwa ego n'ihi mbelata ụgwọ ọrụ ọrụ, mma ngwaahịa dị mma ebe ọ bụ na ọ dị obere njikwa akwụkwọ ntuziaka, nchekwa na-akwalite ebe ọ na-ewepụ mmejọ ọ bụla mmadụ nwere ike ime n'iwepu skru, yana ịba ụba na nkwụghachi azụ n'ihi otu uwe. akpaghị aka usoro.

Na mgbakwunye, enwere ike iji usoro a mepụta akụkụ nwere geometry gbagwojuru anya dị ka ọtụtụ eriri dị n'ime ma ọ bụ skru countersunk na-enweghị usoro nhazi ọzọ achọrọ ma emechaa.

Nzaghachi chepụta

3D ebu imewe

Nhazi ebu maka ebu na-anaghị agbagharị akpaaka

Ịmepụta akpụ akpụ ntụtụ na-ewepụ akpaaka chọrọ nleba anya nke ọma maka ngwaahịa, ihe plastik na nha ngwaọrụ.Ngwọta a na-ahụkarị maka ịkpụgharị ogbugba ogbugba akpaaka gụnyere ntinye isi site na rotary, rack, ma ọ bụ worm.

Mgbe ị na-emepụta ihe eji eme ihe na-emepụta ihe na-emepụta ihe na-emepụta ihe, ọ dị mkpa iburu n'uche ihe nke ngwaahịa ahụ, eriri eri na ogologo, mgbidi mgbidi na agbakọọ shrinkage, ụdị plastic na fillers eji na injection ebu.Tụkwasị na nke a, ọkpụkpụ ihe n'akụkụ nwere ike ịdị mkpa iji dozie ụfọdụ nsogbu na-ebilite mgbe imeghe na imechi ebu.Iji mee ka oge okirikiri dị ngwa n'ụzọ dị egwu ka a ka na-enweta nsonaazụ dị mma, a na-ejikarị ihe na-emepe emepe akpaaka.

Enwere ụdị 2: ihichapụ akwụkwọ ntuziaka (demold by force) na akpaghị aka.Manual unscrewing nwere obere arụpụtaghị, ma ebu Ọdịdị dị mfe na adabara obere ogbe mmepụta;akpaka unscrewing nwere elu arụmọrụ na kwụsiri ike mma na adabara nnukwu ogbe mmepụta.N'ime ihe owuwu ihe na-eme ka ọ bụrụ ihe na-akpaghị aka, a ga-edozi nsogbu nke ntụkwasị obi, nkwụsi ike na ịdị irè nke nhazi ihe owuwu.

• Nyocha nke akụkụ plastik: nyocha DFM iji lelee akụkụ maka ngwá ọrụ na ịchọta ihe ngwọta na-akwụ ụgwọ na nke dị irè.

• Họrọ usoro ndị na-agba ọsọ: ọ bụrụ na mmepụta mmepụta dị ukwuu na àgwà kwesịrị ịdị elu, onye na-agba ọsọ na-ekpo ọkụ (dị ka ọnụ ụzọ valvụ) dị nnọọ ezi uche ma baa uru.

• jụrụ oyi:

Iji mee ka nrụpụta mmepụta ihe dị mma, gbochie nrụrụ nke akụkụ plastik, ma gbochie ịrapara na oghere nke mgbasawanye ọkụ nke akụkụ ebu, usoro nju oyi nke ịkpụzi ga-abụ nke zuru oke na nke a pụrụ ịdabere na ya.

• Nhọrọ ihe eji eme ihe: na-ejikarị, anyị na-ahọrọ ihe akpụ akpụ nwere ihe mgbochi dị elu na ihe siri ike.N'ime ọrụ a, anyị na-eji ígwè H13.

• Nhazi akụkụ draịva ebu: a na-enwekarị ụzọ atọ iji chepụta akụkụ mbanye, nke bụ Hydraulic cylinder + rack, moto + Chain na Rack + Gears.

Ndị na-emepụta anyị na-arụ ọrụ nke ọma, maka DFM, ọ na-agwụ n'ime ụbọchị 2, dịka ọrụ ahụ dị ngwa ngwa, ya mere ndị ahịa chọrọ ka ha mee 3D imewe ozugbo, ọ dịghị mkpa ịme nhazi 2D, ya mere 3D kwụsịrị n'ime ụbọchị 3.

Anyị nwere ndị na-emepụta 6 nwere ahụmahụ karịa afọ 8 n'ụlọ.Ma anyị nwekwara ndị mmekọ imebe bụ ọkachamara na naanị maka ebu & akụkụ imewe azụmahịa dị ka ndabere mgbe gị kwadoro ka anyị rịọ maka enyemaka.

FAQ

N'ihi na akpaaka-unscrewing injection ebu

1. Gịnị bụ ebu okpomọkụ nke a akpaaka unscrewing PPSU injection ebu?

Ọnọdụ okpomọkụ bụ 160 ~ 180 degrees.

2. Olee maka ndidi nke a 4 oghere akụkụ si unscrewing ebu?

Ebu: +_0.01mm,

Akụkụ plastik: +_0.02mm

Ngwaahịa eji arụ ọrụ: +_0.005mm.

3. Kedu ihe ị na-ejikarị eme ihe n'ụdị injection plastik na ihe nkedo anwụ?

N'ihi na plastic injection ịkpụzi, anyị na-eji plastic ihe na-agụnye PPSU, PEEK, ABS, PC, PC + ABS, PMMA, PP, HIPS, PE (HDPE, MDPE, LDPE).PA12, PA66, PA66 + fiber, TPE, TPR, TPU, PPSU, LCP, POM, PVDF, PET, PBT…

Na maka nkedo anwụ, ihe aluminom na-abụkarị A380,A356,6061.

4. Gịnị bụ ụzọ oge chepụta ihe injection ebu na Suntime Precision Mold?

DFM: Na-emekarị n'ime ụbọchị ọrụ 2.
Nhazi ebu 2D: Ọ na-adịkarị n'ime ụbọchị ọrụ 3-4.
Ihe osise 3D: Ọ na-adịkarị n'ime ụbọchị ọrụ 4-5.

5. Ebee ka SPM dị ka onye na-eweta ngwá ọrụ?

Ụlọ ọrụ anyị dị na Chang obodo Dong Guan City dị na ndịda China, bụ ebe nrụpụta mbụ.Nkeji 10 gaa Shen Zhen.Nkeji 30 ruo ọdụ ụgbọ elu Shen Zhen.

6. Kedu maka nka nzikọrịta ozi nke otu SPM?

a).Ọgaranya nwere ahụmahụ ahịa na ndị injinia na-agbaso ọrụ ma na-ekwurịta okwu n'asụsụ Bekee nwere nkà.

b).24/7 ụdị ọrụ.Otu na otu njikwa oru ngo.

c).Bịa ileta oge ọ bụla na ndị otu oge anwụ na-eleta ndị ahịa kwa afọ.

d).akụkọ kwa izu kwa Mọnde.(2 na-akọ otu izu ma ọ bụrụ na ọ dị mkpa).

e).Zaghachi ozi-e ọ bụla n'ime awa 24, ị nwere ike ịkpọ anyị oge ọ bụla, ọbụlagodi n'etiti abalị.